Group

46/283X1/2TC - Guided cove cutter 63.5mm diameter

46/283X1/2TC
€149.57

The two bearings supplied offer the means of cutting different depths of mouldings.

    D
    63.5 mm
    C
    1 inch
    C
    25.4 mm
    B
    12.7 mm
    B2
    16 mm
    R
    1 inch
    R
    25.4 mm
    OL
    90.9 mm
    Shank Diameter
    1/2 inch

    For stationary machines at max. recommended speed 16,000 RPM

    Product Image Product Ref Diagram No Description Quantity Required Price for 1
    B127A - Bearing 1/2" diameter 3/16" bore B127A

    Trend Router Cutter Bearing - for 3/16in bottom mounting

    • High quality ball bearing for free running against an edge to prevent heat build up.
    • 3/16in inside diameter for use on bottom mounted trimmer and profiling cutters.
    • 1/2in outside diameter for matched fit to trimming and templating cutters.
    • Bearings are grease packed for maximum efficiency and lifespan.
    • Shielding to both sides of the bearing prevents penetration of dust for maximum performance.
    €8.11
    B16A - Bearing 5/8" diameter 3/16" bore B16A

    Bearings are shielded to prevent penetration of dust and grease packed for life.

    • They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
    • Scrape off any resin build-up.
    • Always check the tightness of the fixing screw before using cutter.
    €10.38
    SP-C - Spare part pack SP-C

    Spare part packs make ordering spares easier.

    • Packs include, hex key (if required), screw, washer and shield (if required).
    €4.39

    Videos

    Bearing Guided Cutter Video

    Our video guide on how to use your bearing guided cutters, the different types and applications.

    Product Questions

    Write Your Own Question
    Your Question: