We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
KWJ750P - Pro Multi-material worktop jig for up to 750mm worktop
KWJ750P
Pro Multi-material jig for worktop joints 150mm - 750mm
- FRONT EDGE SETTING All settings are done from the front edge eliminating any discrepancies from scribing or when using non-standard width worktops
- EASY SET REFERENCE WINDOW Fast set up for any backset, simply align to a measured line
- 5 BACKSET OPTIONS (3, 5, 10, 24, 35mm) to meet the demands of new materials, edge profiles and trends
- FLUSH EDGE COMPATABILITY Allows worktops to be cut flush with door faces for handleless contemporary styles without additional measuring or marking up
- SINGLE PASS JOINT CUTTING ON NARROWER BACKSETS WITH THINNER WORKTOPS Minimises strain on the router and extends cutter life
- FAST JOINTING Cuts a full male and female joint in 15 minutes including setting up
- MULTIPLE WORKTOP MATERIAL COMPATABILITY Compact laminate, Composite, Solid Wood, Chipboard Laminate
- NO SET WORKTOP WIDTH RESTRICTION No need for alignment pins for worktop widths
- FRUSTRATION FREE SETUP Simple intuitive setup; measure, mark, clamp and cut
- OFFSET CAMS Unique backset wedges for consistent easy setting
- EDGE PROFILE COMPATABILITY Covers square edge, small radius, Postform radius and bullnose profiles
- CLAMP RECESSES For below the surface clamping for unrestricted routing with plunge saw clamps
- Length
- 985 mm
- Width
- 335 mm
- Thickness
- 12 mm
- Weight
- 4.73 kg
- End Cut
- 45 degrees
- Corner Radius
- 40 mm
- Corner Radius
- 100 mm
- Corner Radius
- 400 mm
- Corner Mitre Joint
- 45 degrees
- Female cut material width loss (inset)
- variable
- Bolt recesses
- 3
- Bolt recess centres
- 175 + 175 mm
- Bolt recess width
- 14 mm
Requires:
- Guide bush
- 30 mm
- Plunge router
- 1/2-inch (min. 1300 watts)
- Cutter
- 12.7 mm x 50 mm cut
- Clamps
- Two
Patent Pending
no spare products