Group

LOCK/JIG/A - Lock Jig Large

LOCK/JIG/A
€119.99

Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate for larger locks quickly & accurately.

  • Suitable for DDA (Disabilty Discrimination Act) lock size.
  • 20mm x 235mm radius end face plate, 24mm x 235mm radius end face plate and 17mm x 170mm mortise.
  • Adaptor plate included to allow smaller templates (239mm x 60mm) to be fitted (as supplied with standard LOCK/JIG).
  • Suitable for doors 34mm to 58mm thick.
  • An auger bit and drill is required to complete deep mortises.
  • The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise.
  • Suits DIN style locks.
Door thickness min.
34 mm
Door thickness max.
58 mm

Lock faceplate sizes

Metric (D x OL)
Template
20 x 235mm (RE**)
1
24 x 235mm (RE**)
2

Lock mortise size

17 x 170mm*
A

*Mortise is actually 180mm to give 5mm clearance each end.

**Rounded ends

Product Image Product Ref Diagram No Description Quantity Required Price for 1
GB/COLL/1630 - Guide Bush Collar 16mm to 30mm GB/COLL/1630 016

Aluminium collar to fit guide bushes.

  • Enables single shaped templates to be used to cut perfectly matching pocket & inlay.
  • Collars have integral rubber 'O' rings to ensure collar secures onto guide bush.
  • Templates should be made with suitable sized corners for the collar being used.
  • The correct diameter straight cutter as indicated should always be used.
  • Guide bush not included.
1 €10.39
MAG/PACK/1 - Magnet pack 15mm x 3mm pack of Four MAG/PACK/1 015

These magnets are nickel plated and incredibly strong making them ideal for a variety of workshop applications with endless possibilities.

  • Nickel coated Neodymium Iron Boron.
1 €14.50
WP-LOCK/03 - Lock Jig spacer finger WP-LOCK/03 003

Replacement spacer finger for the LOCK/JIG.

    6 €2.28
    WP-LOCK/04 - Lock Jig mini knob 15mm diameter M5 WP-LOCK/04 004

    Replacement mini knob for the LOCK/JIG.

      2 €6.61
      WP-LOCK/05 - Lock Jig adjustable lever M8 WP-LOCK/05 005

      Replacement adjustable lever M8 for the LOCK/JIG.

        3 €8.68
        WP-LOCK/06A - Lock jig knob M10 x 40 ball end WP-LOCK/06A 006

        Replacement knob for the LOCK/JIG.

          2 €9.96
          WP-LOCK/08A - Plastic cap for ball end stud WP-LOCK/08A 008

          Replacement plastic cap for the LOCK/JIG.

            2 €2.28
            WP-LOCK/A/14 - LOCK/JIG/A adapter plate standard template WP-LOCK/A/14 018

            The adaptor plate for the LOCK/JIG/A.

              1 €24.02
              WP-LOCK/A/T/1 - LOCK/JIG/A template 20mm x 235mm faceplate rounded ends WP-LOCK/A/T/1 018

              Replacement template for the LOCK/JIG/A.

                1 €16.57
                WP-LOCK/A/T/2 - LOCK/JIG/A template 24mm x 235mm faceplate rounded ends WP-LOCK/A/T/2 018

                Replacement template for the LOCK/JIG/A.

                  1 €16.57
                  WP-WASH/29 - Washer split spring for M5 WP-WASH/29 011

                  Replacement washer.

                    2 €1.20

                    Videos

                    Lock Jig Video

                    Using the Lockjig to rout a door lock.

                    Hinge Jig Video

                    Demonstrating how easyand quick it is to hang a door using a hinge jig

                    Tibby Singh Trend Lock Jig Demo Video

                    Tibby Singh Demonstrates the Trend Lock Jig - D&M Show 2015.

                    Product Questions

                    The standard radius produced with our lock jig is 6mm this is the radius from a 12mm diameter cutter. A 10mm radius can be obtained with a 20mm cutter C030A in conjunction with a GB240 24mm guide bush.

                    ... Read more

                    The fingers on the Lock Jig allow the jig to be lifted off the door edge by up to 6mm. This prevents the guide bush from catching the door.

                    ... Read more

                    The GB30A should not be used on thin internal doors as the guide bush can contact the jig body. We advise GB30 with 6mm spigot length is used.

                    ... Read more

                    Yes and no because although the mortise could be recessed the faceplate would require some work with a chisel to finish it off. Also special sizes of plate may be required.

                    ... Read more

                    No you can use the collar that comes included with the Lock Jig. This fits over the top of the GB160, which will then increase the diameter to 30mm.

                    ... Read more

                    Yes, there is an insert that is placed in the jig which reduces the aperture length.

                    ... Read more

                    Yes we have a wide selection of other sizes available. Please call our technical department with your lock dimensions.

                    ... Read more

                    Yes, available from stock, the part number is WP-LOCK/T/14.

                    ... Read more
                    Write Your Own Question
                    Your Question: