RTI/PLATE - Router table insert plate

A large rigid router table insert plate for incorporation into user-made router tables.

• Thermoset phenolic.
• Two concentric snap-in rings.
• Three hole sizes of 98mm, 68mm & 32mm dia.
• Concentric rings and radial lines on underside for easy centring of router.
• Moulded with slight crown (0.8mm) for distortion free cuts.
• Corner clips to clamp to table underside.
• Can be mounted to 19mm tops with edge rebate of 6.35mm deep x 12.7mm wide.
• Plate will require drilling by user to suit make and model of router to be fitted.
• User made router table will require safety device accessories to be fitted.