Group

46/280X1/4TC - Bearing guided cove cutter 12.7mm radius

46/280X1/4TC
€111.17

The two bearings supplied offer the means of cutting different depths of mouldings.

    D
    34.9 mm
    C
    16 mm
    B
    9.5 mm
    B2
    12.7 mm
    R
    1/2 inch
    R
    12.7 mm
    OL
    55 mm
    Shank Diameter
    1/4 inch
    Product Image Product Ref Diagram No Description Quantity Required Price for 1
    B127B - Bearing 1/2" diameter 1/8" bore B127B

    Bearings are shielded to prevent penetration of dust and grease packed for life.

    • They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
    • Scrape off any resin build-up.
    • Always check the tightness of the fixing screw before using cutter.
    €13.09
    B95B - Bearing 3/8" diameter 1/8" bore B95B

    Bearings are shielded to prevent penetration of dust and grease packed for life.

    • They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
    • Scrape off any resin build-up.
    • Always check the tightness of the fixing screw before using cutter.
    €10.38
    SP-F - Spare part pack SP-F

    Spare part packs make ordering spares easier.

    • Packs include, hex key (if required), screw, washer and shield (if required).
    €5.04

    Videos

    Bearing Guided Cutter Video

    Our video guide on how to use your bearing guided cutters, the different types and applications.

    Product Questions

    Write Your Own Question
    Your Question: