Group

Please note, from the 1st May 2025 we will no longer be taking orders on this site.  For more information, please click here.

46/3X1/4TC - Bevel trimmer 20mm diameter 14mm length

46/3X1/4TC
€75.94

Cut a wider edge line, at an angle of 80 degrees.

  • A 16mm bearing is supplied as standard.
  • A larger 19mm bearing will spread the wear of the cutting edges.
D
20 mm
C
14 mm
A
80 degrees
OL
57 mm
Shank Diameter
1/4 inch
Product Image Product Ref Diagram No Description Quantity Required Price for 1
B16 - Bearing 5/8" diameter 1/4" bore B16

Bearings are shielded to prevent penetration of dust and grease packed for life.

  • They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
  • Scrape off any resin build-up.
  • Always check the tightness of the fixing screw before using cutter.
€7.45
SP-A - Spare part pack SP-A

Spare part packs make ordering spares easier.

  • Packs include, hex key (if required), screw, washer and shield (if required).
€3.40

Product Questions

Write Your Own Question
Your Question: