Group

46/501X1/2TC - Double guided trim profile cutter four flute

46/501X1/2TC
€136.31

Four fluted TCT trimmer/profiler.

  • Super fine finish.
  • Ball bearings fitted to both nose and shank.
  • Allows templates to be placed either on top or the bottom of the material, for ease of routing.
  • Allows for irregular grained timber to be profiled more easily, by turning component other way up.
  • Light passes, maximum 2mm trimming.
D
3/4 inch
D
19.1 mm
C
1 31/32 inch
C
50 mm
OL
114.5 mm
B
19.1 mm
Shank Diameter
1/2 inch
Product Image Product Ref Diagram No Description Quantity Required Price for 1
B19 - Bearing 3/4" diameter 1/4" bore B19

Trend Router Cutter Bearing - for 1/4in shank mounting

  • High quality ball bearing for free running against an edge to prevent heat build up.
  • 1/4in inside diameter for direct fit to router shanks and arbors.
  • 3/4in outside diameter for matched fit to trimming and templating cutters.
  • Bearings are grease packed for maximum efficiency and lifespan.
  • Shielding to both sides of the bearing prevents penetration of dust for maximum performance.
€8.32
B19C - Bearing 3/4" diameter 1/2" bore B19C

Bearings are shielded to prevent penetration of dust and grease packed for life.

  • They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
  • Scrape off any resin build-up.
  • Always check the tightness of the fixing screw before using cutter.
€12.58
COLL/12 - Collar pack COLL/12

Collar Packs are used for cutters with shank mounted bearings.

  • Packs include one collar, grub screw and hex key.
€5.94
SP-E - Spare part pack SP-E

Spare part packs make ordering spares easier.

  • Packs include, hex key (if required), screw, washer and shield (if required).
€3.40

Videos

Bearing Guided Cutter Video

Our video guide on how to use your bearing guided cutters, the different types and applications.

Product Questions

Write Your Own Question
Your Question: