RBT/1 - Routabout Jig 18mm x 1/4" Shank

Access to pipes & cables beneath chipboard floors in seconds.

• For builders, plumbers & electricians.
• A 250mm diameter opening can be cut and made good in seconds.
• Designed for use in new or existing 18mm chipboard or similar floors.
• Cuts only the thickness of the board.
• No waste, the piece cut out is used to make good the floor.
• All you need is a plunge router (750 watts or above).
• A Unibase may be required for certain makes and models of router.
• Supplied with three floor rings