Group

TR25X1/4TC - Guided trimmer 9.5mm diameter x 12.7

TR25X1/4TC
€36.05

For trimming and bevelling timber, lippings and plastic laminate edges.

  • Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
  • PTFE coated, indicated by distinctive black colouring.
  • Can be used on hardwood & softwood, fibreboard, plywood and particle board.
  • Etched dimensions on extra long 40mm shanks.
  • Comes in a re-usable clear tube for protection.
D
3/8 inch
D
9.5 mm
C
1/2 inch
C
12.7 mm
OL
63 mm
Shank Diameter
1/4 inch
Product Image Product Ref Diagram No Description Quantity Required Price for 1
B95A - Bearing 3/8" diameter 3/16" bore B95A

Bearings are shielded to prevent penetration of dust and grease packed for life.

  • They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
  • Scrape off any resin build-up.
  • Always check the tightness of the fixing screw before using cutter.
€9.86

Product Questions

Write Your Own Question
Your Question: