Group

VARIJIG - Varijig system adjustable frame

VARIJIG
€89.99

Adjustable frame and guide for use with a router.

  • Adjustable frame for rectangles and squares.
  • Allows a router to cut recesses, slots, face panel moulds etc. Can also be used to create panel doors for kitchens etc.
  • Four lengths of 700mm extrusion with dual metric/imperial measuring scales.
  • Working area 600mm x 600mm.
  • Cross cut accuracy to 0.1mm, a square is required to square frame before use.
  • Includes router anti-tilt block.
  • Use with a guide bush with minimum 8mm spigot length, or use Unibase as guide.
  • Secure with standard clamps or use optional clamp kit.
Extrusion width
54mm
Extrusion height
15.8mm
Top T slot neck
8.2 mm x 1.7 mm
Top T slot width
13.1 mm x 2.2mm
Product Image Product Ref Diagram No Description Quantity Required Price for 1
WP-SCW/31 - M6 x 25mm countersunk slot machine screw WP-SCW/31 009

Replacement M6 machine screw.

    1 €1.15
    WP-VJS/03 - Varijig machine screw M4X6 countersink black WP-VJS/03 003

    Replacement machine screw for the Vari jig.

      8 €1.84
      WP-VJS/04 - Varijig scale Metric/Imperial 640mm WP-VJS/04 004

      Replacement metric /imperial scale for the Vari jig.

        4 €3.13
        WP-VJS/05 - Varijig anti tilt device WP-VJS/05 005

        Replacement anti tilt device for the Vari jig.

          1 €6.22
          Out of Stock WP-VJS/06 - Varijig end cap for extrusion WP-VJS/06 006

          Replacement extrusion end cap for the Vari jig.

            4 €2.28
            WP-VJS/07 - Varijig Extrusion 700mm Black WP-VJS/07 007

            Replacement extrusion for the Vari jig.

              4 €18.65
              WP-VJS/08 - Varijig corner frame WP-VJS/08 008

              Replacement corner frame for the Vari jig.

                4 €8.29

                Product Questions

                The secret to great clamping with the varijig is two leave the lever up almost vertical, bring the two ends of the clamp together against the work peice, push the clamp handle down once, so its flat,and again so the clamp handle is pointing down this will clamp the straight edge rigid.

                ... Read more
                Write Your Own Question
                Your Question: