Group

VJS/TG/JIG - Varijig Tenon & Grooving Jig

VJS/TG/JIG
€163.57

Allows grooves and tenons to be cut using a router.

  • Can be used to crosscut boards with a router or circular saw.
  • Frame is adjustable to allow narrower or wider grooves to be routed.
  • The max. adjustment is 70mm depending on the diameter of the router base.
  • The edge of the frame can be used as a guide to trim a panel square using a router.
  • Two sliding stops to set groove length.
  • Squaring butt has the facility to accept a spelch block to allow a full-length groove.
  • Fixing screws are included for this purpose. Working length is 400mm.
  • Can be used with any plunge router fitted with a guide bush of minimum 8mm projetction.
  • Router not included.

Working length based on 30 mm guide bush and 12 mm diameter cutter being used:-

Max. without end stops used
412 mm
Max. with one end stop used
397 mm
Max. with two end stops used
382 mm
Max. working width using end stops* (12mm dia. cutter)
18 mm
Max. width adjustment depending on router base diameter
70 mm

no spare products

Product Questions

Write Your Own Question
Your Question: