Group

C155X8MMTC - Ogee profile scriber set

C155X8MMTC
€112.93

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe.

  • Cuts both parts of the joint by only changing the cutter height. No reassembly of the tool is required so saving time.
  • Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. When using Easyset cutters take several passes.
D
41 mm
C
17 mm
C2
6.35 mm
B
22 mm
R
4 mm
Shank Diameter
8 mm
OL
90 mm
Timber thickness min.
18 mm
Timber thickness max.
22 mm
Product Image Product Ref Diagram No Description Quantity Required Price for 1
BB22 - Bearing 22mm diameter 8mm bore BB22 005

Bearings are shielded to prevent penetration of dust and grease packed for life.

  • They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
  • Scrape off any resin build-up.
  • Always check the tightness of the fixing screw before using cutter.
2 €16.91

Product Questions

Write Your Own Question
Your Question: