14/2X1/2TC - Up-Down cutter
14/2X1/2TC
Tungsten Carbide Tipped.
- Two flute cutter with tips sheared up and down, giving a fine finish.
- For trimming veneered and double-faced boards, plywoods and natural timbers.
- These cutters have the action of pushing the chips towards the middle of the board being cut, thus ensuring that the veneers are sheared off cleanly in the process.
- D
- 1/2 inch
- D
- 12.7 mm
- C
- 54 mm
- OL
- 108 mm
- Shank Diameter
- 1/2 inch
no spare products
Videos
Straight Router Cutters Video
Our video guide to using straight router cutters which highlights the different types, grades and applications.
Safety Sheets
Product Questions
The cutter that will give a fine finish on both veneers is either the 14/1x1/2TC or 14/2x1/2TC, up and down shears.
Write Your Own Question