18/20X1/2TC - Panel bevel cutter
18/20X1/2TC
This Raised Panel cutter runs best at lower speeds between 12,000 and 18,000 RPM.
- Matches our range of profile scribers.
- Suitable for use on natural timber and MDF.
- When joining sections to produce solid wood panels, alternate the growth ring direction of adjacent boards to prevent cupping.
- When moulding the panel, cut across the end grain first. Any break out will then be removed when cutting with the grain.
- Suitable panel mould for use with Ref. PSC/5.
- D
- 50 mm
- D2
- 16 mm
- C
- 17 mm
- A
- 10 degrees
- OL
- 55.1 mm
- Shank Diameter
- 1/2 inch
For stationary machines at max. recommended speed 18,000 RPM
no spare products