Group

C169X1/2TC - Bearing guided ogee panel 17.5mm radius

C169X1/2TC
€99.68

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF.

  • For use in a router table only.
  • Take several passes, increasing the depth with each pass.
  • Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF.
  • Stationary use only.
D
67 mm
C
5/8 inch
C
16 mm
B
12.7 mm
R
17.5 mm
OL
78.5 mm
Shank Diameter
1/2 inch
Product Image Product Ref Diagram No Description Quantity Required Price for 1
B127A - Bearing 1/2" diameter 3/16" bore B127A

Trend Router Cutter Bearing - for 3/16in bottom mounting

  • High quality ball bearing for free running against an edge to prevent heat build up.
  • 3/16in inside diameter for use on bottom mounted trimmer and profiling cutters.
  • 1/2in outside diameter for matched fit to trimming and templating cutters.
  • Bearings are grease packed for maximum efficiency and lifespan.
  • Shielding to both sides of the bearing prevents penetration of dust for maximum performance.
€8.11

Product Questions

Write Your Own Question
Your Question: