Group

CNCM/DPM - CNC/DPM Dot Peen Module

CNCM/DPM
€527.88

Increase the capabilities of your CNC Mini routing machine with the addition of an impact dot peen module.

  • The CNC dot peen module can be easily fitted to any CNC/MINI/1E or CNC /MINI/2E machine by removing the router unit (4 screws), having removed outer safety cover (4 Screws and 2 screws on the 1E). Approximate change over time 5 minutes. Check with the Trend CNC Team if unsure if the module will fit your machine. Plug and Play
  • The impact dot peen can be used to engrave on the following materials, Brass, Copper, Gold, Silver, Steel, Stainless Steel, Aluminium and Plastics.
  • Supplied with updated software for the machine
  • The impact dot peen module is compatible with V Carve CAD/CAM software or the supplied Bravo EDIT software
  • The vibration frequency is controlled through the CAD/CAM software using the depth of cut to control vibration frequency
  • Supplied with full instructions for fitting and use
  • This product is CE certified

no spare products

Product Questions

Write Your Own Question
Your Question: