QR/SET/2 - Quick Release 60 Piece Set in Toolholder

Heavy duty fabric tool holder with a selection of assorted Craft Pro tools.

• Magnetic Quick Chuck which is fitted into a standard 3/8-inch key or keyless chuck and allows any direct drive 1/4-inch hex bits to then 'snap' in effortlessly.
• Flat bits 16mm, 19mm, 22mm, 25mm and 30mm diameter.
• Auger bits 10mm and 13mm diameter.
• Hex drill bits 1.5mm, 2mm 3mm, 4mm, 5mm, 6mm and 7mm diameter.
• Drill bit guides 2mm and 2.75mm for hinges.
• Drill countersinks with 2.5mm, 3.25mm and 3.5mm drill bits.
• Twenty-three 25mm insert bits Pozi, Phillips, slotted, Torx and hex.
• Three Pozi 50mm screwdriver bits.
• Magnetic bit holder with retractable barrel.
• Magnetic nut drivers for 6mm, 8mm, 10mm and 12mm A/F bolts.
• Square drive adapters 1/4-inch, 3/8-inch and 1/2-inch A/F.
• Tungsten Carbide Tipped masonry drills 5mm, 6mm, 7mm and 8mm diameter.
• Deburr countersink and hole enlarger tools.
• Set supplied in tool holder with elasticated pockets to hold quick change shank and belt strap and are hook and loop fastening.