We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Frequently Asked Questions
When Using Trend’s Kitchen Worktop Jigs, can you use a different combination of cutter and guide bush E.G 12mm Cutter & 30mm Guide bush?
No, the correct combination of 12.7mm diameter cutter and 30mm Guide bush has to be used as the offset needed between cutter and guide bush is 8.7mm, any other combination will result in a poor joint.
Created by Technical Support Team
Was this article helpful ?
Category
- Routers FAQs
- Router Cutters FAQs
- Safety & PPE FAQs
- Tool Storage FAQs
- Routing Workshop Jigs FAQs
- Router Tables FAQs
- Routing On-site Jig FAQs
- Routing Accessories FAQs
- Dust Extraction FAQs
- Power Tool Accessories
- Drilling FAQs
- Trend Snappy FAQs
- Clamping FAQs
- Abrasives FAQs
- Sawblade FAQs
- Planer, Jigsaw & Multitool FAQs
- Sharpening & Tool Care FAQs
- Measuring & Hand Tools FAQs
- CNC Machining FAQs
- Catalogues & Books FAQs
- Spare Parts FAQs
Tags
- Routing (34)
- Clamping (1)
- product (6)
- (29)
- Compatibility (25)
- Sharpening (2)
- Sharpening (3)
- Screws (3)
- Countersinks (3)
- Substances (3)
- Filters (8)
- Materials (10)
- Radius (4)
- Replacement (3)
- Jointing (14)
- Kitchen Fitting (10)
- Cutting Speed (1)
- Smartbench (1)
- Scribing (1)
- Shipping (1)
- Respirators (1)
- Repair (1)
- Life expectancy (1)
- Respirators (16)
- Dividers (1)
- Batteries (4)
- Biscuit Jointing (4)
- Jig Making (1)
- CNC Machining (7)
- Templating (1)
- Repairs (1)
- Holding The Workpiece (1)
- Cutter Sets (1)
- Bearings (1)
- Mortise & Tenon (1)
- Auger Bits (1)
- Flat Bits (1)
- Drilling (1)
- Hex Keys (1)
- Plug Cutters (1)
- Drill Bit Guides (1)
- Door Fitting (18)
- Grub Screws (1)
- Kitchen Fitting (2)
- Cleaning (3)
- Accessories (1)
- Power Wattage (1)
- Container Volume (1)
- Noise Rating (1)
- Cleaning (2)
- Templates (1)
- Stair Jig (4)
- T Slot Track (1)
- Parallel Groove (1)
- Bore Size (1)
- Modification (1)
- Maintenance (6)
- Modification (3)
- Rebating (1)
- Jointing (2)
- Torx Screw (1)
- Line-up Pin (3)
- Guide Bush (4)
- Materials (3)
- Replacement (1)
- Countersinks (1)
- Thread (2)
- Measurements (1)
- Angle (1)
- Routing (1)
- Contents (1)
- Door Fitting (1)
- storage (1)
- guide bushes (1)
- worktop (6)
- collet (1)
- spindle moulding (1)
- bearing (1)
- rpe (2)
- hinges (2)
- door (1)
- Frames (1)
- Hinges (2)
- Worktop (6)
- Filter (1)
- Protection (1)
- Dust Extractor (2)
- Warranty (1)
- Router Table (2)